Kenar Kesme (EASYCUTT®)

 
  Teknik Dosya
 
     - Kenar Kesme Resimler
 

Makas Sistemi ile kesen ram dışına monte Kenar Kesme Sistemi,
EASYCUTT®

       Örgü kumaşların kenar kesme işleminde, ram üzerine monte edilmiş sabit klasik kesme sistemleri bazen yetersiz kalmaktadır. Bu konudaki açığı gidermek için, ACC , EASY-CUTT  kesme sistemini geliştirmiştir. EASTCUTT® kesme kafaları hareketli bir  bir kızak üzerine monte edilmiştir ve özellikle kenarlarda aşırı derecede bolluk olduğu durumlarda veya beslemenin % 35’i aştığı durumlarda çok iyi sonuçlar vermektedir.
         Kumaş iğnelerden çıktıktan sonra kesme işlemi gerçekleştiği için, kumaşın en kontrolü, sabit sistemlerdeki kadar hassas değildir fakat bunun yanında sistem çalışma şartlarına çok az duyarlıdır ( çalışma hızı, iğne kaçığı, besleme gibi). Bıçaklar çok düşük hızlarda döndüğünden dolayı kesme işlemi çok düşük ısılarda gerçekleşir ve bıçak ömrü sabit sistemlere oranla çok uzundur. İğne kaçığı durumunda ise, kaçık bittikten sonra kumaş kolaylıkla tekrar bıçaklar arasına girer ve işlem devam eder. Kumaştan çok ince bir kısım kesildiği için (fire), verim ve karlılık  EASTCUTT® kullanan firmalarda son derece yüksektir.

Shear Cut Out-of-stenter mounted Edge Cutting System

In the edge trimming process of knit fabrics , sometimes the conventional methods where the trimming system is mounted on the stenter are not sufficient. To compensate for this insuffiency, ACC has developed the out-of-stenter mounted EASTCUTT® system. Especially in applications where there is excess slack in the fabric edges or where there is overfeed above  35 % , the EASTCUTT® system is ideal.
         Although the fabric control is not as precise as on the stenter-mounted systems, this system is much less sensitive to operating conditions. Due to the relatively low speed of  cutting, the blade  life is relatively long and the cutting temperature is relatively  low.  The fabric re-enters the cutting area very easily after a missing pin. The width of the trimmed strip is very thin which results directly in more profit for the company using the EASTCUTT® system

 

Kenar Kesme Markamızın Logosu
   
Kenar Kesme
 

2005 © MTS Makina - Designed by MyWeb